POZOR! Tato stránka je ve výstavbě! Zjisti si skutečný stav na Matrixu, nebo přispěj dokumentací stroje.
AMS-132
IN-GROVE TOOL BODY
- cat. id: RC-1075
- Fusion 360 library: Lab_files\Fusion 360 templates\AMS-132.tools
Insert
- 30° V-TIP INSERT KNIFE
- cat. id: RC-360
- Tip Width: 0,005”
- Cutting Heigh”: 16mm
- Shank: 1/4
- Flutes: 1
- Materials: aluminium, brass, copper, wood, plastic, acrilic, plexiglass, veenered plywood, MDF/HDF, laminate
CNC running parameters based on 1/8” depth per pass:
- RPM: 18 000
- Feed rate: 50” inches per minute
- Chipload per tooth: 0.002”
- Ramp down rate: 50” inches per minute
90° V-GROOVE
- cat. id: 45751
- Diameter” 1-1/4”
- Cutting height: 15/16”
- Shank: 1/4”
- Lenght: 2-13/64”
- Flutes: 2
- Materials: wood
CNC running parameters based on 1/4” depth per pass:
- RPM: 18 000
- Feed rate: 90” inches per minute
- Chipload per tooth: 0.002”
- Ramp down rate: 45” inches per minute
120° V-GROOVE
- cat. id: 45756
- Diameter” 1-1/4”
- Cutting height: 21/32”
- Shank: 1/4”
- Lenght: 1-59/64”
- Flutes: 2
- Materials: wood
CNC running parameters based on 1/4” depth per pass:
- RPM: 18 000
- Feed rate: 90” inches per minute
- Chipload per tooth: 0.002”
- Ramp down rate: 45” inches per minute
60° V-GROOVE
- cat. id: 45705
- Diameter” 1/2”
- Cutting height: 5/8”
- Shank: 1/4”
- Lenght: 1-3/4”
- Flutes: 2
- Materials: wood
CNC running parameters based on 1/4” depth per pass:
- RPM: 18 000
- Feed rate: 90” inches per minute
- Chipload per tooth: 0.002”
- Ramp down rate: 45” inches per minute
90° INSERT V-GROOVE
- cat. id: RC-45711
Insert
- 90° SOLID CARBIDE INSERT KNIFE
- cat. id: AMA-12
- Diameter” 11/16”
- Cutting Heigh”: 21/64
- Shank: 1/4
- Lenght: 1-61/64”
- Flutes: 2
- Materials: wood
CNC running parameters based on 1/4” depth per pass:
- RPM: 18 000
- Feed rate: 90” inches per minute
- Chipload per tooth: 0.002”
- Ramp down rate: 25” inches per minute
TAPERED BALL NOSE
- cat. id: 46282
- Coating: ZrN
- Angle: 5.4°
- Radius: 1/32”
- Tip diameter: 1/16”
- Cutting height: 1”
- Shank: 1/4”
- Lenght: 3”
- Flutes: 4 up-cut
- Materials: aluminium, brass, copper, wood, plastic, acrilic, plexiglass, veenered plywood, MDF/HDF, fiberglass, signfoam, signboad, HDU, graphite, phenolic composite, composite, Dibond
CNC running parameters based on 1x diameter depth per pass:
- RPM: 18 000
- Feed rate: 30” inches per minute
- Chipload per tooth: 0.0003”
- Ramp down rate: 8” inches per minute
18° CARVING LINER
- cat. id: 45783
- Diameter” 1/4”
- Cutting height: 5/8”
- Shank: 1/4”
- Lenght: 2-1/2”
- Flutes: 1
- Materials: wood
CNC running parameters based on 1/4” depth per pass:
- RPM: 18 000
- Feed rate: 90” inches per minute
- Chipload per tooth: 0.005”
- Ramp down rate: 90” inches per minute
15° V-GROOVE ENGRAVING
- cat. id: 45780
- Diameter” 3/6”
- Cutting height: 1/2”
- Shank: 1/4”
- Lenght: 2”
- Flutes: 2
- Materials: wood
CNC running parameters based on 1/4” depth per pass:
- RPM: 18 000
- Feed rate: 90” inches per minute
- Chipload per tooth: 0.002”
- Ramp down rate: 45” inches per minute
90° INSERT CORE BOX
- cat. id: RC-45910
Insert
- RCK-266 SOLID CARBIDE INSERT KNIFE
- cat. id: RCK-266
- Radius: 1/4”
- Diameter: 1/2”
- Cutting Heigh: 1/2
- Shank: 1/4
- Lenght: 1-1/8”
- Flutes: 1
- Materials: wood
CNC running parameters based on 1/4” depth per pass:
- RPM: 18 000
- Feed rate: 80” inches per minute
- Chipload per tooth: 0.004”
- Ramp down rate: 80” inches per minute
15° SPIRAL BALL NOSE
- cat. id: 46376
- Radius: 1/8”
- Diameter” 1/4”
- Cutting height: 1”
- Shank: 1/4”
- Lenght: 2-1/2”
- Flutes: 2 up-cut
- Materials: wood, mdf, hdf, sign foam
CNC running parameters based on 1/4” depth per pass:
- RPM: 18 000
- Feed rate: 100” inches per minute
- Chipload per tooth: 0.003”
- Ramp down rate: 50” inches per minute
SPIRAL FLUTE PLUNGE
- cat. id: 46102
- Diameter” 1/4”
- Cutting height: 3/4”
- Shank: 1/4”
- Lenght: 2-1/2”
- Flutes: 2 up-cut
- Materials: wood, mdf, hdf, laminate
CNC running parameters based on 1x diameter depth per pass:
- RPM: 18 000
- Feed rate: 100” inches per minute
- Chipload per tooth: 0.003”
- Ramp down rate: 50” inches per minute
COMPRESSION SPIRAL
- cat. id: 46170
- Diameter” 1/4”
- Cutting height: 7/8”
- Shank: 1/4”
- Lenght: 2-1/2”
- Flutes: 2
- Materials: wood, mdf, hdf, laminate, melamine
CNC running parameters based on 5/16” depth per pass:
- RPM: 18 000
- Feed rate: 40” inches per minute
- Chipload per tooth: 0.003”
- Ramp down rate: 20” inches per minute
ALUMINIUM CUTTING
- cat. id: 51454
- Diameter” 1/8”
- Cutting height: 1/2”
- Shank: 1/4”
- Lenght: 2”
- Flutes: 1 up-cut
- Materials: aluminium, brass, copper, alupanel, dibond
CNC running parameters based on 1x diameter depth per pass:
- RPM: 18 000
- Feed rate: 40” inches per minute
- Chipload per tooth: 0.002”
- Ramp down rate: 40” inches per minute
ALUMINIUM CUTTING
- cat. id: 51402
- Diameter” 1/4”
- Cutting height: 5/8”
- Shank: 1/4”
- Lenght: 2”
- Flutes: 1 up-cut
- Materials: aluminium, brass, copper, alupanel, dibond
CNC running parameters based on 1x diameter depth per pass:
- RPM: 18 000
- Feed rate: 100” inches per minute
- Chipload per tooth: 0.006”
- Ramp down rate: 100” inches per minute
PLASTIC CUTTING
- cat. id: 51454
- Diameter” 1/8”
- Cutting height: 1/2”
- Shank: 1/4”
- Lenght: 2”
- Flutes: 1 up-cut
- Materials: plastic, acrylic, plexiglass, corrugated polypropylene, sign foam, HDU, solid surface, wood
CNC running parameters based on 1x diameter depth per pass:
- RPM: 18 000
- Feed rate: 60” inches per minute
- Chipload per tooth: 0.004”
- Ramp down rate: 60” inches per minute
PLASTIC CUTTING
- cat. id: 51404
- Diameter” 1/4”
- Cutting height: 3/4”
- Shank: 1/4”
- Lenght: 2”
- Flutes: 1
- Materials: plastic, acrylic, plexiglass, corrugated polypropylene, sign foam, HDU, solid surface, wood
CNC running parameters based on 1x diameter depth per pass:
- RPM: 18 000
- Feed rate: 100” inches per minute
- Chipload per tooth: 0.006”
- Ramp down rate: 100” inches per minute
POINT CUTTING ROUNDOVER
- cat. id: 56125
- Radius: 1/8”
- Diameter” 1/4”
- Cutting height: 5/16”
- Shank: 1/4”
- Lenght: 2”
- Flutes: 1
- Materials: wood
CNC running parameters based on 1/8 diameter depth per pass:
- RPM: 18 000
- Feed rate: 70” inches per minute
- Chipload per tooth: 0.004”
- Ramp down rate: 70” inches per minute
MINI INSERT SPOILBOARD
- cat. id: RC-2248
Insert
- HMA-12 4-SIDED SOLID CARBIDE INSERT KNIFE
- cat. id: HMA-12
- Diameter: 1-1/2”
- Cutting Heigh: 12mm
- Shank: 1/4
- Lenght: 1-11/16”
- Wings: 2
- Materials: wood, MDF, HDF
CNC running parameters based on 1/8” depth per pass:
- RPM: 18 000
- Feed rate: 110” inches per minute
- Chipload per tooth: 0.003”
- Ramp down rate: 55” inches per minute