Informace o provozu Industry

Vzhledem k ochranným opatřením proti šíření viru SARS-CoV-2 je v platnosti povinnost nosit roušky v prostorách Industry. Otevřenost jednotlivých částí industry se řídí aktuálně platnými opatřeními.

Difference between revisions of "AMS-132"

From Industra Labs
Jump to navigation Jump to search
Line 221: Line 221:
 
*Chipload per tooth: 0.006"
 
*Chipload per tooth: 0.006"
 
*Ramp down rate: 100" inches per minute
 
*Ramp down rate: 100" inches per minute
 +
 +
==PLASTIC CUTTING==
 +
*cat. id: [https://www.toolstoday.com/p-5801-solid-carbide-spiral-o-flute-aluminum-cutting-up-cut-down-cut-router-bits.aspx?&variantids=11697,0&keywords=51454 51454]
 +
*Diameter" 1/8"
 +
*Cutting height: 1/2"
 +
*Shank: 1/4"
 +
*Lenght: 2"
 +
*Flutes: 1 up-cut
 +
*Materials: plastic, acrylic, plexiglass, corrugated polypropylene, sign foam, HDU, solid surface, wood
 +
 +
CNC running parameters based on 1x diameter depth per pass:
 +
*RPM: 18 000
 +
*Feed rate: 60" inches per minute
 +
*Chipload per tooth: 0.004"
 +
*Ramp down rate: 60" inches per minute
 +
 +
==PLASTIC CUTTING==
 +
*cat. id: [https://www.toolstoday.com/p-5879-solid-carbide-spiral-o-flute-plastic-cutting-up-cut-down-cut-router-bits.aspx?&variantids=9759,0&keywords=51404 51404]
 +
*Diameter" 1/4"
 +
*Cutting height: 3/4"
 +
*Shank: 1/4"
 +
*Lenght: 2"
 +
*Flutes: 1
 +
*Materials: plastic, acrylic, plexiglass, corrugated polypropylene, sign foam, HDU, solid surface, wood
 +
 +
CNC running parameters based on 1x diameter depth per pass:
 +
*RPM: 18 000
 +
*Feed rate: 100" inches per minute
 +
*Chipload per tooth: 0.006"
 +
*Ramp down rate: 100" inches per minute
 +
 +
==POINT CUTTING ROUNDOVER==
 +
*cat. id: [https://www.toolstoday.com/point-cutting-roundover-router-bits.html?variantids=11510,0 56125]
 +
*Radius: 1/8"
 +
*Diameter" 1/4"
 +
*Cutting height: 5/16"
 +
*Shank: 1/4"
 +
*Lenght: 2"
 +
*Flutes: 1
 +
*Materials: wood
 +
 +
CNC running parameters based on 1/8 diameter depth per pass:
 +
*RPM: 18 000
 +
*Feed rate: 70" inches per minute
 +
*Chipload per tooth: 0.004"
 +
*Ramp down rate: 70" inches per minute
 +
 +
==MINI INSERT SPOILBOARD==
 +
*cat. id: [https://www.toolstoday.com/insert-spoilboard-surfacing-rabbeting-flycutter-leveler-surface-planer-and-bed-skimming-router-bit.html?variantids=11747,0&keywords=RC-2248 RC-2248]
 +
===Insert===
 +
*HMA-12 4-SIDED SOLID CARBIDE INSERT KNIFE
 +
*cat. id: [https://www.toolstoday.com/v-5538-hma-12.html HMA-12]
 +
*Diameter: 1-1/2"
 +
*Cutting Heigh: 12mm
 +
*Shank: 1/4
 +
*Lenght: 1-11/16"
 +
*Wings: 2
 +
*Materials: wood, MDF, HDF
 +
 +
CNC running parameters based on 1/8" depth per pass:
 +
*RPM: 18 000
 +
*Feed rate: 110" inches per minute
 +
*Chipload per tooth: 0.003"
 +
*Ramp down rate: 55" inches per minute

Revision as of 18:24, 12 July 2020

IN-GROVE TOOL BODY

Insert

  • 30° V-TIP INSERT KNIFE
  • cat. id: RC-360
  • Tip Width: 0,005"
  • Cutting Heigh": 16mm
  • Shank: 1/4
  • Flutes: 1
  • Materials: aluminium, brass, copper, wood, plastic, acrilic, plexiglass, veenered plywood, MDF/HDF, laminate

CNC running parameters based on 1/8" depth per pass:

  • RPM: 18 000
  • Feed rate: 50" inches per minute
  • Chipload per tooth: 0.002"
  • Ramp down rate: 50" inches per minute

90° V-GROOVE

  • cat. id: 45751
  • Diameter" 1-1/4"
  • Cutting height: 15/16"
  • Shank: 1/4"
  • Lenght: 2-13/64"
  • Flutes: 2
  • Materials: wood

CNC running parameters based on 1/4" depth per pass:

  • RPM: 18 000
  • Feed rate: 90" inches per minute
  • Chipload per tooth: 0.002"
  • Ramp down rate: 45" inches per minute

120° V-GROOVE

  • cat. id: 45756
  • Diameter" 1-1/4"
  • Cutting height: 21/32"
  • Shank: 1/4"
  • Lenght: 1-59/64"
  • Flutes: 2
  • Materials: wood

CNC running parameters based on 1/4" depth per pass:

  • RPM: 18 000
  • Feed rate: 90" inches per minute
  • Chipload per tooth: 0.002"
  • Ramp down rate: 45" inches per minute

60° V-GROOVE

  • cat. id: 45705
  • Diameter" 1/2"
  • Cutting height: 5/8"
  • Shank: 1/4"
  • Lenght: 1-3/4"
  • Flutes: 2
  • Materials: wood

CNC running parameters based on 1/4" depth per pass:

  • RPM: 18 000
  • Feed rate: 90" inches per minute
  • Chipload per tooth: 0.002"
  • Ramp down rate: 45" inches per minute

90° INSERT V-GROOVE

Insert

  • 90° SOLID CARBIDE INSERT KNIFE
  • cat. id: AMA-12
  • Diameter" 11/16"
  • Cutting Heigh": 21/64
  • Shank: 1/4
  • Lenght: 1-61/64"
  • Flutes: 2
  • Materials: wood

CNC running parameters based on 1/4" depth per pass:

  • RPM: 18 000
  • Feed rate: 90" inches per minute
  • Chipload per tooth: 0.002"
  • Ramp down rate: 25" inches per minute

TAPERED BALL NOSE

  • cat. id: 46282
  • Coating: ZrN
  • Angle: 5.4°
  • Radius: 1/32"
  • Tip diameter: 1/16"
  • Cutting height: 1"
  • Shank: 1/4"
  • Lenght: 3"
  • Flutes: 4 up-cut
  • Materials: aluminium, brass, copper, wood, plastic, acrilic, plexiglass, veenered plywood, MDF/HDF, fiberglass, signfoam, signboad, HDU, graphite, phenolic composite, composite, Dibond

CNC running parameters based on 1x diameter depth per pass:

  • RPM: 18 000
  • Feed rate: 30" inches per minute
  • Chipload per tooth: 0.0003"
  • Ramp down rate: 8" inches per minute

18° CARVING LINER

  • cat. id: 45783
  • Diameter" 1/4"
  • Cutting height: 5/8"
  • Shank: 1/4"
  • Lenght: 2-1/2"
  • Flutes: 1
  • Materials: wood

CNC running parameters based on 1/4" depth per pass:

  • RPM: 18 000
  • Feed rate: 90" inches per minute
  • Chipload per tooth: 0.005"
  • Ramp down rate: 90" inches per minute

15° V-GROOVE ENGRAVING

  • cat. id: 45780
  • Diameter" 3/6"
  • Cutting height: 1/2"
  • Shank: 1/4"
  • Lenght: 2"
  • Flutes: 2
  • Materials: wood

CNC running parameters based on 1/4" depth per pass:

  • RPM: 18 000
  • Feed rate: 90" inches per minute
  • Chipload per tooth: 0.002"
  • Ramp down rate: 45" inches per minute

90° INSERT CORE BOX

Insert

  • RCK-266 SOLID CARBIDE INSERT KNIFE
  • cat. id: RCK-266
  • Radius: 1/4"
  • Diameter: 1/2"
  • Cutting Heigh: 1/2
  • Shank: 1/4
  • Lenght: 1-1/8"
  • Flutes: 1
  • Materials: wood

CNC running parameters based on 1/4" depth per pass:

  • RPM: 18 000
  • Feed rate: 80" inches per minute
  • Chipload per tooth: 0.004"
  • Ramp down rate: 80" inches per minute

15° SPIRAL BALL NOSE

  • cat. id: 46376
  • Radius: 1/8"
  • Diameter" 1/4"
  • Cutting height: 1"
  • Shank: 1/4"
  • Lenght: 2-1/2"
  • Flutes: 2 up-cut
  • Materials: wood, mdf, hdf, sign foam

CNC running parameters based on 1/4" depth per pass:

  • RPM: 18 000
  • Feed rate: 100" inches per minute
  • Chipload per tooth: 0.003"
  • Ramp down rate: 50" inches per minute

SPIRAL FLUTE PLUNGE

  • cat. id: 46102
  • Diameter" 1/4"
  • Cutting height: 3/4"
  • Shank: 1/4"
  • Lenght: 2-1/2"
  • Flutes: 2 up-cut
  • Materials: wood, mdf, hdf, laminate

CNC running parameters based on 1x diameter depth per pass:

  • RPM: 18 000
  • Feed rate: 100" inches per minute
  • Chipload per tooth: 0.003"
  • Ramp down rate: 50" inches per minute

COMPRESSION SPIRAL

  • cat. id: 46170
  • Diameter" 1/4"
  • Cutting height: 7/8"
  • Shank: 1/4"
  • Lenght: 2-1/2"
  • Flutes: 2
  • Materials: wood, mdf, hdf, laminate, melamine

CNC running parameters based on 5/16" depth per pass:

  • RPM: 18 000
  • Feed rate: 40" inches per minute
  • Chipload per tooth: 0.003"
  • Ramp down rate: 20" inches per minute

ALUMINIUM CUTTING

  • cat. id: 51454
  • Diameter" 1/8"
  • Cutting height: 1/2"
  • Shank: 1/4"
  • Lenght: 2"
  • Flutes: 1 up-cut
  • Materials: aluminium, brass, copper, alupanel, dibond

CNC running parameters based on 1x diameter depth per pass:

  • RPM: 18 000
  • Feed rate: 40" inches per minute
  • Chipload per tooth: 0.002"
  • Ramp down rate: 40" inches per minute

ALUMINIUM CUTTING

  • cat. id: 51402
  • Diameter" 1/4"
  • Cutting height: 5/8"
  • Shank: 1/4"
  • Lenght: 2"
  • Flutes: 1 up-cut
  • Materials: aluminium, brass, copper, alupanel, dibond

CNC running parameters based on 1x diameter depth per pass:

  • RPM: 18 000
  • Feed rate: 100" inches per minute
  • Chipload per tooth: 0.006"
  • Ramp down rate: 100" inches per minute

PLASTIC CUTTING

  • cat. id: 51454
  • Diameter" 1/8"
  • Cutting height: 1/2"
  • Shank: 1/4"
  • Lenght: 2"
  • Flutes: 1 up-cut
  • Materials: plastic, acrylic, plexiglass, corrugated polypropylene, sign foam, HDU, solid surface, wood

CNC running parameters based on 1x diameter depth per pass:

  • RPM: 18 000
  • Feed rate: 60" inches per minute
  • Chipload per tooth: 0.004"
  • Ramp down rate: 60" inches per minute

PLASTIC CUTTING

  • cat. id: 51404
  • Diameter" 1/4"
  • Cutting height: 3/4"
  • Shank: 1/4"
  • Lenght: 2"
  • Flutes: 1
  • Materials: plastic, acrylic, plexiglass, corrugated polypropylene, sign foam, HDU, solid surface, wood

CNC running parameters based on 1x diameter depth per pass:

  • RPM: 18 000
  • Feed rate: 100" inches per minute
  • Chipload per tooth: 0.006"
  • Ramp down rate: 100" inches per minute

POINT CUTTING ROUNDOVER

  • cat. id: 56125
  • Radius: 1/8"
  • Diameter" 1/4"
  • Cutting height: 5/16"
  • Shank: 1/4"
  • Lenght: 2"
  • Flutes: 1
  • Materials: wood

CNC running parameters based on 1/8 diameter depth per pass:

  • RPM: 18 000
  • Feed rate: 70" inches per minute
  • Chipload per tooth: 0.004"
  • Ramp down rate: 70" inches per minute

MINI INSERT SPOILBOARD

Insert

  • HMA-12 4-SIDED SOLID CARBIDE INSERT KNIFE
  • cat. id: HMA-12
  • Diameter: 1-1/2"
  • Cutting Heigh: 12mm
  • Shank: 1/4
  • Lenght: 1-11/16"
  • Wings: 2
  • Materials: wood, MDF, HDF

CNC running parameters based on 1/8" depth per pass:

  • RPM: 18 000
  • Feed rate: 110" inches per minute
  • Chipload per tooth: 0.003"
  • Ramp down rate: 55" inches per minute